Description

Discover the tape specially formulated for customers who demanded heavy duty durability in an anti-slip, glow in the dark floor tape. Let NovaGlow DuraLine create a safer working environment.

NovaGlow DuraLine photoluminescent floor marking tape – ideal for:

Health and safety, particularly in heavy duty environments: Ramps, steps, stairs, scaffolds, platforms and walkways in manufacturing and construction environments.

Why use heavy duty photoluminescent marking tape?

In any industrial or manufacturing environment your floor takes some pounding. In the dirtiest, dustiest, most demanding manufacturing environments it’s not enough to have a floor marking tape that glows in the dark when the lights fail. And it’s not enough to have an anti-slip tape that outlines hazards. It needs to be durable too.

The plain or printed glow in the dark tape of NovaGlow DuraLine is over-laminated with a heavily embossed, tough, durable clear PV anti-slip protective laminate. The result is our toughest anti-slip and photoluminescent tape yet. So no matter what you put your floor through, you know it will keep protecting your people and processes for longer.

Certified performance and safety

• NovaGlow DuraLine floor marking tape is BGR Classified to R11 for slip resistance in use as a floor graphic.
• It observes both DIN 51130 and BGR 181 for ramp test slip resistance of floor coverings.
• Photoluminescent properties conform to PSPA Class B (High performance when charged in bright lighting conditions).

From this….                                                                 to this…

How to use floor marking tapes

NovaGlow DuraLine is the ideal complement to our range of printed photoluminescent tapes.

1. Ensure surface on which DuraLine will be applied is clean, dry and free from loose or peeling materials.
2. Apply a thin coat of Anti Slip Surface Primer to the area where DuraLine will be placed and allow to dry fully.
3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. Round the corners of any pieces cut from rolls.
4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
5. Continue to remove liner while firmly pressing exposed floor marking tape into place.
6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.
7. Mop or wipe to keep your floor marking tape visible.

NovaGlow DuraLine – technical information

Install a photoluminescent tape that lasts – order NovaTough DuraLine

Got a Question?