Safety Track® – 3500 Medium Grade Resilient - Innova Solutions
01282 867390

Menu

Products - Safety Track® – 3500 Medium Grade Resilient

Description

Designed for heavy footfall, yet comfortable enough for bare feet. Durably anti-slip, yet mop-friendly. There’s more to Medium Grade Resilient Safety Track® than resilience.

Like all Jessup® Safety Track® surfaces, Resilient is an anti-skid tape designed to protect your people, your customers and your reputation.

Medium Grade Resilient is designed for high use industrial and commercial environments, but its capabilities stretch much further – from surfboards to jet skis. The unrivalled non-slip coating is matched by strength and durability. It’s easy to clean too.

Jessup® Medium Grade Resilient Safety Track® – ideal for:

Health and safety: Ladders, steps, stairs, scaffolds, platforms and walkways in manufacturing and construction environments and public buildings
Recreational vehicles: Snowmobiles, all terrain vehicles, garden tractors and lawn mowers
Aquatic: Swimming pools, diving boards, jet skis, water skis, surfboards and boats
Conveyors and pulleys

Why Jessup® Medium Grade Resilient Safety Track®?

Jessup® 3500 Resilient Safety Track® is:

  • Powerfully anti-slip, with a coefficient of friction unrivalled in a medium grade anti-slip surface
  • Aggressively adhesive – so it lasts longer indoors and out
  • Mop friendly

Certified performance and safety

Jessup® 3500 Medium Grade Resilient Safety Track® is National Flooring Safety Institute (NFSI) certified for “High Traction”.

How to apply Jessup® Resilient Safety Track®

  1. Ensure surface on which Safety Track® will be applied is clean, dry and free from loose or peeling materials.
  2. Apply a thin coat of Anti Slip Surface Primer to the area where Safety Track® will be placed and allow to dry fully.
  3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. Round the corners of any pieces cut from rolls.
  4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
  5. Continue to remove liner while firmly pressing exposed Safety Track® into place.
  6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.

NOTE: In exterior applications, prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.

Jessup® 3500 Safety Track® – commercial grade technical information

Roll length60feet*
Roll width1" to 48"
ColoursGrey and Black
Thickness
Substrate0.020 inch (0.508mm)
Pressure Sensitive Adhesive0.002 inch (0.051 mm)
Release Liner0.002 inch (0.051 mm)
Service Temperature
High (14 days at 220°F)No visible effects, moderate shrinkage and high elasticity
Low (14 days at -20°F)No visible effects

*Pre cut 6” x 24” treads also available

Got a Question?

Gallery

Product Downloads

Technical Data Sheet (pdf, 39.56 KB)
bonding people, fixing problems