Innova Solutions
Menu
NovaBond XS 110B
Discover the high strength bonding tape for plastics, metals and other low surface energy materials. NovaBond XS 110B acrylic foam tape – ideal for: Manufacturing and signage: The high tack formulation is specifically designed to bond low surface energy substrates including plastics, metals, polypropylene, urethane and powder coated materials. The visco-elastic structure ensures a strong…
Adhesive Tapes, High Strength Bonding Tapes Enquire NowDescription
Discover the high strength bonding tape for plastics, metals and other low surface energy materials.
NovaBond XS 110B acrylic foam tape – ideal for:
Manufacturing and signage: The high tack formulation is specifically designed to bond low surface energy substrates including plastics, metals, polypropylene, urethane and powder coated materials. The visco-elastic structure ensures a strong bond, even with different materials and expansion rates.
Why NovaBond XS 110B high strength bonding tape?
- Specially formulated for low surface energy bonding
- Incredibly high bond strength delivers durability and longevity
- Special low surface energy adhesive formulation means you may not need to abrade or prime
- Withstands:
- Extremes of temperature
- High forces applied to the bond
- Water
- Most solvents and chemicals
- Differential expansion and contraction
- Interior or exterior performance
- Easy release siliconised filmic liner improves assembly times
- High tack and good initial handling strength for improved production speeds and aesthetics
How to apply NovaBond XS 110B low surface energy bonding tape
- Abrade (roughen) the surface where necessary*. This will provide a ‘key’ to which the tape can bond and increase bond strength by as much as 35%
- Clean with NovaBond Surface Cleaner
- Prime the surface where necessary*. Independent tests at Loughborough University show that using the correct primer can increase final bond strength by up to 50%. You can find the correct NovaBond Surface Primer here.
- Remove the liner. Align the parts to be bonded.
- With firm pressure, apply NovaBond XS 110B to one of the surfaces to be bonded. Use a NovaBond roller to allow the high strength bonding tape to wet out more effectively, even on low surface energy substrates, and reach ultimate bond strength more quickly.
- Apply firm pressure to the bond with the NovaBond roller.
- Ultimate bond strength will be achieved in 72 hours.
*If you’re unsure whether abrading or priming are necessary, please contact us.
NovaBond XS 110B acrylic foam tape technical information
| Colour | Black |
|---|---|
| Thickness | 1.1mm |
| Standard roll dimensions | 12, 19 & 25mm widths x 33m rolls |
| Dynamic shear (mean load) | 627N (surface area 800mm²) – Force applied 45N for 60 seconds – Jaw speed 50mm/minute |
| 180° Peel* (mean load) | 62N (surface area 60mm²) – Force applied 20N |
| Tensile load* (mean load) | 65N (surface area 60mm²) – Force applied 45N for 60 seconds – Jaw speed 10mm/minute |
| Service temperature | -40°c to 95°c (short term: 200°c) |
| Elongation | >700% |
| Application | Minimum 15°c (ideally between 21°c and 40°c) |
| Temperature | Relative humidity 55% ± 10% |
| Liner | Red filmic |
