NovaLite SignFix 9LV is a single component low viscosity light activated structural acrylic adhesive designed to bond cast acrylic sheet with a bond strength that should always outperform the substrate. This ultra high strength is achieved by using a bespoke blend of advanced acrylic polymers that will cure on demand when exposed to visible light.…Invisible Laminating Adhesives, Structural Adhesives Enquire Now
NovaLite SignFix 9LV is a single component low viscosity light activated structural acrylic adhesive designed to bond cast acrylic sheet with a bond strength that should always outperform the substrate. This ultra high strength is achieved by using a bespoke blend of advanced acrylic polymers that will cure on demand when exposed to visible light.
Advantages and Benefits
Following the growing concern regarding the possible carcinogenic effects of Dichloromethane that is common on many solvent based acrylic systems, we have developed a system that not only does not contain dichloromethane but it cures on demand as well. This alternate is very safe to use and brings a number of marked improvements to the adhesive system including:
Instructions For Use
Surface preparation: Thoroughly clean the surfaces you intend to bond with NovaBond Surface Cleaner using a clean, lint-free cloth. Follow the instructions and allow time for the solvent to ‘flash off’ (evaporate).
Apply direct from a 250ml squeezable bottle using the fine nozzle attached. When squeezing the bottle, exert a gentle, consistent pressure to prevent air bubbles forming within the laminating adhesive.
Cover approximately 50% of the surface area using a slow, consistent motion. Draw the pool of adhesive out to the edges of the surface area ensuring the entire surface is covered. It’s better to over-apply the adhesive than under-apply and leave air bubbles to appear once the top surface is added.
Float the top surface onto the laminating adhesive and apply moderate pressure.
Don’t worry about any excess adhesive leaking out – it’s the only way to guarantee complete elimination of air bubbles.
Expose the transparent surface to white light (natural or artificial) or UV light. Ideally, use a lightbox to avoid any risk in moving the pieces. The adhesive will cure in seconds, taking slightly longer on thicker materials or coloured or frosted finishes.
Machine finish the edges to suit
Flame polish the edges to a smooth gloss finish
Properties of Uncured Material
|Viscosity||Brookfield T Bar 125cps|
|Cure system||Visible Light|
Performance of Cured Material
|ASTM D1002 Lapshear Acrylic||Substrate Failure|
|Gap Fill||0.15 – 0.6mm|
|Temperature Range||-55°C to 120°C|
500g Aluminium Flask
Storage & Shelflife
NovaLite SignFix 9LV should be stored unopened in a cool dry location, out of direct sunlight. Stored correctly this grade can offer a 12 month shelf life from manufacture.
Health and Safety in Use
NovaLite SignFix 9LV is a methyl methacrylate and should not be used without consulting the MSDS (download available on this page), which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.
Please contact us at firstname.lastname@example.org for further information.
Innova Solutions: bonding people, fixing problems: +44 (0)1282 867 390