Description

NovaBond high strength bonding tapes produce the strongest of bonds – but NovaBond Glass Primer can make that bond up to 50% stronger.

Why NovaBond  Glass Primer?

NovaBond Glass Primer helps high strength bonding tapes and adhesives bond glass even more effectively.

The primer is specifically formulated for the NovaBond SignFix range of high strength bonding tapes, although you’ll find it’s compatible with most advanced acrylic adhesives used on glass.

It works by chemically altering the surface of the glass, increasing the surface energy and making it more receptive to adhesive bonding. You need no specialist equipment to apply it, it’s fast acting and easy to use.

Where to use NovaBond Glass Primer

Use it to prime:

• Glass (including coloured, textured or frosted glass surfaces)
• For non-glass surfaces including metals and low surface energy plastics, use NovaBond Surface Primer or NovaBond LSE Surface Primer

How to apply NovaBond  Glass Primer

Preparation:

Remove dirt, dust, excessive grease, oils or other contaminants with NovaBond Surface Cleaner, following the instructions.

Application

1. Open the container carefully and release pressure slowly.
2. Apply the primer to the glass surface(s) you intend to bond using a clean, dry, lint-free cloth. The solvent should ‘flash off’ (evaporate) in around 10 seconds but dry any over-wet areas and leave the primer to act for 5 minutes prior to bonding.

Safety information:

Occasional skin contact with NovaBond Silane Primer should have no adverse affect. Avoid prolonged soaking or repeated contact.

Please note: The above guidance does not constitute a Material Safety Data Sheet (MSDS).

For handling, storage, composition, disposal and safety information, please ensure you have read and fully understood the NovaBond Glass Primer MSDS.

Got a Question?