Innova Solutions
Menu
Safety Track® – 3500 Medium Grade Resilient
Designed for heavy footfall, yet comfortable enough for bare feet. Durably anti-slip, yet mop-friendly. There’s more to Medium Grade Resilient Safety Track® than resilience. Like all Jessup® Safety Track® surfaces, Resilient is an anti-skid tape designed to protect your people, your customers and your reputation. Medium Grade Resilient is designed for high use industrial and…
Anti-Slip Tapes, Resilient, Safer Enquire NowDescription
Designed for heavy footfall, yet comfortable enough for bare feet. Durably anti-slip, yet mop-friendly. There’s more to Medium Grade Resilient Safety Track® than resilience.
Like all Jessup® Safety Track® surfaces, Resilient is an anti-skid tape designed to protect your people, your customers and your reputation.
Medium Grade Resilient is designed for high use industrial and commercial environments, but its capabilities stretch much further – from surfboards to jet skis. The unrivalled non-slip coating is matched by strength and durability. It’s easy to clean too.
Jessup® Medium Grade Resilient Safety Track® – ideal for:
Health and safety: Ladders, steps, stairs, scaffolds, platforms and walkways in manufacturing and construction environments and public buildings
Recreational vehicles: Snowmobiles, all terrain vehicles, garden tractors and lawn mowers
Aquatic: Swimming pools, diving boards, jet skis, water skis, surfboards and boats
Conveyors and pulleys
Why Jessup® Medium Grade Resilient Safety Track®?
Jessup® 3500 Resilient Safety Track® is:
- Powerfully anti-slip, with a coefficient of friction unrivalled in a medium grade anti-slip surface
- Aggressively adhesive – so it lasts longer indoors and out
- Mop friendly
Certified performance and safety
Jessup® 3500 Medium Grade Resilient Safety Track® is National Flooring Safety Institute (NFSI) certified for “High Traction”.
How to apply Jessup® Resilient Safety Track®
- Ensure surface on which Safety Track® will be applied is clean, dry and free from loose or peeling materials.
- Apply a thin coat of Anti Slip Surface Primer to the area where Safety Track® will be placed and allow to dry fully.
- Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. Round the corners of any pieces cut from rolls.
- Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
- Continue to remove liner while firmly pressing exposed Safety Track® into place.
- Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.
NOTE: In exterior applications, prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.
Jessup® 3500 Safety Track® – commercial grade technical information
| Roll length | 60feet* |
|---|---|
| Roll width | 1" to 48" |
| Colours | Grey and Black |
| Thickness | |
| Substrate | 0.020 inch (0.508mm) |
| Pressure Sensitive Adhesive | 0.002 inch (0.051 mm) |
| Release Liner | 0.002 inch (0.051 mm) |
| Service Temperature | |
| High (14 days at 220°F) | No visible effects, moderate shrinkage and high elasticity |
| Low (14 days at -20°F) | No visible effects |
*Pre cut 6” x 24” treads also available
