Innova Solutions
Menu
Safety Track® – 3200 Heavy Duty
Jessup® Heavy Duty Safety Track® is the anti-skid tape designed to protect your people, your customers and your reputation in the most extreme environments. Safety Track® non-slip tapes are the only anti-slip surfaces certified as ‘High Traction’ by the NFSI – and none perform better in harsh environments than Heavy Duty Safety Track®. It’s the…
Anti-Slip Tapes, Heavy Duty, Safer Enquire NowDescription
Jessup® Heavy Duty Safety Track® is the anti-skid tape designed to protect your people, your customers and your reputation in the most extreme environments.
Safety Track® non-slip tapes are the only anti-slip surfaces certified as ‘High Traction’ by the NFSI – and none perform better in harsh environments than Heavy Duty Safety Track®. It’s the larger silicone carbide grit particles that ensure surfaces remain durably anti-slip in even the most extreme conditions – and the UK’s only official supplier of Jessup® Safety Track® is Innova Solutions.
Jessup® 3200 Heavy Duty Safety Track® – ideal for:
- Farm machinery
- Construction equipment: Including cherry pickers and forklifts
- Recreational vehicles: Snowmobiles, all terrain vehicles, garden tractors and lawn mowers
- Commercial transport: Ship and airline decks, buses, trains, cargo holds
- Automotive: Machine shops and garages
- Harsh environments: Loading docks, catwalks, cold storage areas, platforms and ramps
Why Jessup® Heavy Duty Safety Track®?
The harshest environments are where slip hazards present their greatest threat. Protect against lost time, sick payments, compensation and loss of reputation with the most effective non-slip surface: Jessup® Safety Track®.
Heavy Duty Safety Track® consists of large abrasive particles bonded by a tough, durable polymer to a dimensionally stable plastic film. The adhesive reverse side can be anchored to a wide variety of surfaces and withstands fluids, fuels, chemicals, mud and more.
No non-skid material delivers greater slip resistance or greater durability.
Jessup® 3200 Heavy Duty Safety Track® is:
- Engineered to exceed OSHA Standards
- Aggressively adhesive – so it lasts longer indoors and out
- Designed for consistent slip resistance
- Resistant to oil, mud, diesel, chemicals and fluids
- Available in a wide range of stock and custom sizes
How to apply Jessup® Heavy Duty Safety Track®
- Ensure surface on which Safety Track® will be applied is clean, dry and free from loose or peeling materials.
- Apply a thin coat of Anti Slip Surface Primer to the area where Safety Track® will be placed and allow to dry fully.
- Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. Round the corners of any pieces cut from rolls.
- Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
- Continue to remove liner while firmly pressing exposed Safety Track® into place.
- Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.
NOTE: In exterior applications, prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.
Jessup® 3200 Safety Track® – commercial grade technical information
| Roll length | 60 feet* |
|---|---|
| Roll width | to 48” |
| Thickness | |
| Substrate | 0.032 inch (0.813mm) |
| Pressure Sensitive adhesive | 0.002 inch (0.051 mm) |
| Release Liner | 0.007 inch (0.178 mm) |
| Service Temperature | |
| High (14 days at 220°F) | No visible effects, slight material shrinkage at high temperatures. |
| Low (14 days at -20°F) | No visible effects |
*Pre cut strips also available
