01282 867390 Technical Support FAQs

Menu

Flex Track® – 4200 Coarse Grade

Feet don’t slip from pedals. Hooves don’t slip on trailer ramps. Trainers don’t slip from exercise equipment – when Jessup® Coarse Grade Flex Track® is beneath them. Jessup® 4200 Coarse Grade Flex Track® is a heavily embossed anti-slip PVC developed to make leisure equipment safer. From ride-on lawnmowers to boat trailers, Flex Track® adheres to…

, , Enquire Now

Description

Feet don’t slip from pedals. Hooves don’t slip on trailer ramps. Trainers don’t slip from exercise equipment – when Jessup® Coarse Grade Flex Track® is beneath them.

Jessup® 4200 Coarse Grade Flex Track® is a heavily embossed anti-slip PVC developed to make leisure equipment safer. From ride-on lawnmowers to boat trailers, Flex Track® adheres to metal, sealed wood, and most plastics. Whatever recreational vehicles you use or manufacture, make them safer with Flex Track®.

Jessup® 4200 Coarse Grade Flex Track® – ideal for:

  • Recreational vehicles: Garden tractors, lawnmowers, all terrain vehicles
  • Wet areas: baths, showers and bathing areas
  • Over-laminating floor graphics
  • Horse trailers
  • Foot pedals

Why Jessup® 4200 Coarse Grade Flex Track®?

Jessup® 4200 Coarse Grade Flex Track® is:

  • Non-abrasive embossed PVC
  • Aggressively adhesive – so it adheres to a wide variety of surfaces
  • Easy to clean and mop friendly

Certified performance and safety

Jessup® 4200 Coarse Grade Flex Track® is National Flooring Safety Institute (NFSI) certified for “High Traction” and exceeds OSHA and ADA standards for non-slip protection on hazardous surfaces.

How to apply Jessup® 4200 Coarse Grade Flex Track®

  1. Ensure surface on which Flex Track® will be applied is clean, dry and free from loose or peeling materials.
  2. Apply a thin coat of Anti Slip Surface Primer to the area where Flex Track® will be placed and allow to dry fully.
  3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from step edges. Round the corners of any pieces cut from rolls.
  4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
  5. Continue to remove liner while firmly pressing exposed Flex Track® into place.
  6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.

Jessup® 4200 Coarse Grade Flex Track® – technical information

Roll length60 feet*
Roll width1" to 48"
ColoursBlack, clear and white
Thickness
Substrate0.021 inch (0.457mm)
Pressure Sensitive Adhesive0.002 inch (0.051 mm)
Release Liner0.007 inch (0.178 mm)
Service Temperature
High (14 days at 220°F)No visible effects, moderate shrinkage and high elasticity.
Low (14 days at -20°F)No visible effects

Got a Question?

Product Downloads
Technical Data Sheet (pdf, 178.29 KB)
Support
REACH & RoHS compliance
Open a Trade Account

Trading with Innova Solutions Ltd couldn’t be easier – open a trade account and get even more benefits!

Request a visit Request a call back for further information Call us today bonding people, fixing problems