Innova Solutions
Menu
Safety Track® – 3100 Commercial Grade
Jessup® 3100 Commercial Grade Safety Track® non-skid tapes are the only anti-slip surfaces certified as ‘High Traction’ by the NFSI. When you need a non slip surface to protect your people, your customers and your reputation, which will you choose? It’s the silicone carbide grit that ensures Safety Track® commercial grade surfaces are not only…
Anti-Slip Tapes, Commercial Grade, Safer Enquire NowDescription
Jessup® 3100 Commercial Grade Safety Track® non-skid tapes are the only anti-slip surfaces certified as ‘High Traction’ by the NFSI. When you need a non slip surface to protect your people, your customers and your reputation, which will you choose?
It’s the silicone carbide grit that ensures Safety Track® commercial grade surfaces are not only anti-slip, but durable too. Indoors and out, Jessup® Commercial Grade Safety Track® is the most effective, durable non-slip surface on the market.
Jessup® Commercial Grade Safety Track® – ideal for:
Farm machinery
- Construction equipment: Including cherry pickers and forklifts
- Health and safety: Ladders, steps, stairs, scaffolds, platforms and walkways in manufacturing and construction environments and public buildings
- Public transport: Entry and egress points on buses, trains, ships and aircraft
- Automotive: Garages and maintenance repair areas
- Food service areas
- Conveyors and pulleys
Why Jessup® Commercial Grade Safety Track®?
Slip hazards are a risk to any organisation’s wellbeing. Protect against lost time, sick payments, compensation and loss of reputation with Commercial Grade Safety Track®.
The surface of abrasive particles is bonded by a tough, durable polymer to a dimensionally stable plastic film. The reverse side is coated with a pressure sensitive adhesive, which enables the film to be anchored to a wide variety of surfaces. No non-skid material delivers greater slip resistance.
Jessup® 3100 Safety Track® is:
- Engineered to exceed OSHA Standards
- Aggressively adhesive – so it lasts longer indoors and out
- Designed for consistent slip resistance
- Resistant to chemicals and fluids
- Available in a wide range of stock and custom sizes
Certified performance and safety
Jessup® 3100 Commercial Grade Safety Track® is National Flooring Safety Institute (NFSI) certified for “High Traction”.
How to apply Jessup® Commercial Grade Safety Track®
- Ensure surface on which Safety Track® will be applied is clean, dry and free from loose or peeling materials.
- Apply a thin coat of Anti Slip Surface Primer to the area where Safety Track® will be placed and allow to dry fully.
- Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. Round the corners of any pieces cut from rolls.
- Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
- Continue to remove liner while firmly pressing exposed Safety Track® into place.
- Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.
NOTE: In exterior applications, prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.
Jessup® 3100 Safety Track® – technical information
| Roll Length | 60feet* |
|---|---|
| Roll width | 1/2" to 48" |
| Colours | Black |
| Thickness | |
| Substrate | 0.202inches (0.508mm) |
| Pressure sensitive adhesive | 0.002inches (0.051mm) |
| Release liner | 0.006inches (0.152mm) |
| Service Temperature | |
| High (14 days at 220°F) | No visible effects, slight material shrinkage at high temperatures |
| Low (14 days at -20°F) | No visible effects |
*Pre-cut, reflective and photoluminescent ‘glow in the dark’ strips are also avaliable.
