Description

Feet don’t slip from pedals. Hooves don’t slip on trailer ramps. Trainers don’t slip from exercise equipment – when Jessup® Coarse Grade Flex Track® is beneath them.

Jessup® 4200 Coarse Grade Flex Track® is a heavily embossed anti-slip PVC developed to make leisure equipment safer. From ride-on lawnmowers to boat trailers, Flex Track® adheres to metal, sealed wood, and most plastics. Whatever recreational vehicles you use or manufacture, make them safer with Flex Track®.

Jessup® 4200 Coarse Grade Flex Track® – ideal for:

• Recreational vehicles: Garden tractors, lawnmowers, all terrain vehicles
• Wet areas: baths, showers and bathing areas
• Over-laminating floor graphics
• Horse trailers
• Foot pedals

Why Jessup® 4200 Coarse Grade Flex Track®?

Jessup® 4200 Coarse Grade Flex Track® is:

• Non-abrasive embossed PVC
• Aggressively adhesive – so it adheres to a wide variety of surfaces
• Easy to clean and mop friendly

Certified performance and safety

Jessup® 4200 Coarse Grade Flex Track® is National Flooring Safety Institute (NFSI) certified for “High Traction” and exceeds OSHA and ADA standards for non-slip protection on hazardous surfaces.

How to apply Jessup® 4200 Coarse Grade Flex Track®

1. Ensure surface on which Flex Track® will be applied is clean, dry and free from loose or peeling materials.
2. Apply a thin coat of Anti Slip Surface Primer to the area where Flex Track® will be placed and allow to dry fully.
3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from step edges. Round the corners of any pieces cut from rolls.
4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
5. Continue to remove liner while firmly pressing exposed Flex Track® into place.
6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.

Jessup® 4200 Coarse Grade Flex Track® – technical information

Got a Question?