NovaBond SignFix XS110 HT - Innova Solutions
01282 867390


Products - NovaBond SignFix XS110 HT


Specifically targeting bonding of bare metals prior to powder coating processes, NovaBond SignFix XS110 HT is a heavy duty acrylic pressure sensitive adhesive capable of operating at the high temperatures of 200°C+

NovaBond SignFix XS110 HT - High temperature for powder coating

NovaBond SignFix XS110 HT is the double-sided, heat resistant tape you can rely on for the most demanding, performance critical tasks.

On textured or uneven surfaces, powder coating, temperatures of up to 260°C*, exposed to full sunlight or chemicals, NovaBond SignFix XS110 HT stays strong.


  • Manufacturing:
    • Use on bare metals prior to powder coating and oven-stoving.
  • Signage:
    • Virtually impervious to UV, temperature, ageing or chemicals.
    • Ideal for durable, long-lasting signs in the harshest environments.

Features & benefits

  • Accepts powder coat
  • Can replace spot welds or mechanical fasteners
  • Ultra high sheer and high cohesion – ensuring the tape (and bond) remain strong under stress
  • Resists vibration, impact or shock
  • Good solvent resistance
  • Interior or exterior application
  • Suitable for plasticised PVC but not low surface energy plastics (use NovaBond LSE 110B)
  • 1.1mm thickness Grey/Black tape with red filmic liner 

How to apply NovaBond SignFix XS110 HT acrylic tape

  1. Abrade (roughen) the surface to provide a ‘key’ to which the tape can bond, increasing the bond strength by as much as 35%
  2. Clean with NovaBond Surface Cleaner
  3. Prime the surface using NovaBond Surface Primer 
  4. Independent tests at Loughborough University show that using the correct primer can increase final bond strength by up to 50%. Remove the blue silicon liner.
  5. Align the parts to be bonded.
  6. With firm pressure, apply NovaBond SignFix XS110 HT to one of the surfaces to be bonded.
  7. Using a NovaBond roller will allow the double sided acrylic tape to wet out and reach ultimate bond strength more quickly.
  8. Apply firm pressure to the bond with the NovaBond roller.
  9. Ultimate bond strength will be achieved in 72 hours.

Technical information

CarrierAcrylic layer
LinerRed PE film
90° Peel Adhesion according to AFERA 5001Steel 32N/25mm
Static Shear Strength (to stainless steel)1500g @ 23°c : 500g @ 93°c
Dynamic Shear (@200mm/min)62N/cm2 (after 2 hours) : 67N/cm2 (after 24 hours)
Operating TemperaturesShort term (mins/hrs) 230°c : Long term (days+) 120°c
Application temperatureMinimum 15°c (ideally between 21°c and 40°c)
Temperature resistance according to ISTM D3654 methodFrom -40°c to +150°c (long term) 260°c+ (short term) Area of 6.25² with 1kg load @ 150°c for 10,000 minutes
Solvent ResistanceGood
UV ResistanceExcellent
Standard roll dimensions12, 19 & 25mm widths x 33m rolls

Please contact us at for further information or to discuss your application.

Click HERE to link through to our full product range.

Innova Solutions: bonding people, fixing problems: +44 (0)1282 867 390

Got a Question?

Product Downloads

Technical Data Sheet (pdf, 317.72 KB) Safety Data Sheet (pdf, 281.57 KB)


5 Good Reasons for Using Foam Bonding Tapes Bonding to Powder Coat Overspray Does priming the surface really make a difference? Nova Range product brochure REACH & RoHS compliance Surface Preparation & Application Guide – NovaBond HS Bonding Tapes Low Surface Energy Materials
bonding people, fixing problems