Safety Track® – 3200 Heavy Duty - Innova Solutions
01282 867390


Products - Safety Track® – 3200 Heavy Duty


Jessup® Heavy Duty Safety Track® is the anti-skid tape designed to protect your people, your customers and your reputation in the most extreme environments.

Safety Track® non-slip tapes are the only anti-slip surfaces certified as ‘High Traction’ by the NFSI – and none perform better in harsh environments than Heavy Duty Safety Track®. It’s the larger silicone carbide grit particles that ensure surfaces remain durably anti-slip in even the most extreme conditions – and the UK’s only official supplier of Jessup® Safety Track® is Innova Solutions.

Jessup® 3200 Heavy Duty Safety Track® – ideal for:

  • Farm machinery
  • Construction equipment: Including cherry pickers and forklifts
  • Recreational vehicles: Snowmobiles, all terrain vehicles, garden tractors and lawn mowers
  • Commercial transport: Ship and airline decks, buses, trains, cargo holds
  • Automotive: Machine shops and garages
  • Harsh environments: Loading docks, catwalks, cold storage areas, platforms and ramps

Why Jessup® Heavy Duty Safety Track®?

The harshest environments are where slip hazards present their greatest threat. Protect against lost time, sick payments, compensation and loss of reputation with the most effective non-slip surface: Jessup® Safety Track®.

Heavy Duty Safety Track® consists of large abrasive particles bonded by a tough, durable polymer to a dimensionally stable plastic film. The adhesive reverse side can be anchored to a wide variety of surfaces and withstands fluids, fuels, chemicals, mud and more.
No non-skid material delivers greater slip resistance or greater durability.

Jessup® 3200 Heavy Duty Safety Track® is:

  • Engineered to exceed OSHA Standards
  • Aggressively adhesive – so it lasts longer indoors and out
  • Designed for consistent slip resistance
  • Resistant to oil, mud, diesel, chemicals and fluids
  • Available in a wide range of stock and custom sizes

How to apply Jessup® Heavy Duty Safety Track®

  1. Ensure surface on which Safety Track® will be applied is clean, dry and free from loose or peeling materials.
  2. Apply a thin coat of Anti Slip Surface Primer to the area where Safety Track® will be placed and allow to dry fully.
  3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. Round the corners of any pieces cut from rolls.
  4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
  5. Continue to remove liner while firmly pressing exposed Safety Track® into place.
  6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.

NOTE: In exterior applications, prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.

Jessup® 3200 Safety Track® – commercial grade technical information

Roll length60 feet*
Roll widthto 48”
Substrate0.032 inch (0.813mm)
Pressure Sensitive adhesive0.002 inch (0.051 mm)
Release Liner0.007 inch (0.178 mm)
Service Temperature
High (14 days at 220°F)No visible effects, slight material shrinkage at high temperatures.
Low (14 days at -20°F)No visible effects

*Pre cut strips also available

Got a Question?


Product Downloads

Technical Data Sheet (pdf, 40.55 KB) Fire Performance Ratings (pdf, 548.74 KB)


Banner Hemming
bonding people, fixing problems