Flex Track® – 4100 Fine Grade - Innova Solutions
01282 867390


Products - Flex Track® – 4100 Fine Grade


For non-slip protection in and around baths, showers and bathing areas, choose 4100 Fine Grade Flex Track®.

In wet areas bare feet need a non-slip, non abrasive surface. Flex Track® Fine Grade matches powerful anti-slip protection with foot-friendliness.

Jessup® 4100 Fine Grade Flex Track®– ideal for:

Wet areas: In gyms, sports centres, spas and swimming pools

Why Jessup® Fine Grade Flex Track®?

Wet areas bring an increased risk of slips, falls and injury. Jessup® 4100 Flex Track® is an embossed anti-slip PVC engineered to reduce slips – and the compensation, lost time and loss of reputation that can go with them.

Jessup® Fine Grade Flex Track® is:

  • Non-abrasive, so its kind to feet
  • Aggressively adhesive – so it adheres to a wide variety of surfaces
  • Easy to clean and mop friendly

Certified performance and safety

Jessup® 4100 Fine Grade Flex Track® is National Flooring Safety Institute (NFSI) certified for “High Traction”.

How to apply Jessup® 4100 Fine Grade Flex Track®

  1. Ensure surface on which Flex Track® will be applied is clean, dry and free from loose or peeling materials.
  2. Apply a thin coat of Anti Slip Surface Primer to the area where Flex Track® will be placed and allow to dry fully.
  3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from step edges. Round the corners of any pieces cut from rolls.
  4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
  5. Continue to remove liner while firmly pressing exposed Flex Track® into place.
  6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.

NOTE: Prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.

Jessup® 4100 Fine Grade Flex Track® – technical information

Roll length60 feet*
Roll width1” to 48”
ColoursClear, white, sandstone
Substrate0.018 inch (0.457mm)
Pressure Sensitive Adhesive0.002 inch (0.051 mm)
Release Liner0.007 inch (0.178 mm)
Service Temperature
High (14 days at 220°F)No visible effects, moderate shrinkage and high elasticity
Low (14 days at -20°F)No visible effect

*Pre cut rectangles, strips, shower trays and mats also available. Please ask for details.

Got a Question?


Product Downloads

Technical Data Sheet (pdf, 31.99 KB)


REACH & RoHS compliance
bonding people, fixing problems