Conformable Safety Track® – 3700 - Innova Solutions
01282 867390

Menu

Products - Conformable Safety Track® – 3700

Description

For anti-slip on irregular surfaces choose Conformable Safety Track®.

Jessup® Conformable Safety Track® is a foil-backed, non-slip tape that conforms to almost any irregularly shaped surface.

Jessup® Conformable Safety Track® – ideal for:

Health and safety: Ladder rungs, diamond tread plate, corners, bends and raised surface areas

Why Jessup® Conformable Safety Track®?

Jessup® Conformable Safety Track® is:

  • Designed for high traction indoors and out
  • Stable in high and low temperatures
  • Available in a wide range of roll sizes

Certified performance and safety

Like all Jessup® Safety Track® surfaces, Conformable is engineered to exceed OSHA and ADA standards for non-slip protection on hazardous surfaces, and is certified as “High Traction” by the National Flooring Safety Institute (NFSI).

How to apply Jessup® Conformable Safety Track®

  1. Ensure surface on which Safety Track® will be applied is clean, dry and free from loose or peeling materials.
  2. Apply a thin coat of Anti Slip Surface Primer to the area where Safety Track® will be placed and allow to dry fully.
  3. Space individual pieces a minimum of ½” and a maximum of 2” apart. Position ½” from stair edges. 4. Round the corners of any pieces cut from rolls.
  4. Peel protective liner back about 2” from one end and position piece on surface. IMPORTANT: Minimize touching adhesive with fingers.
  5. Continue to remove liner while firmly pressing exposed Safety Track® into place.
  6. Press into firm contact with surface using a rubber hand roller by starting in the middle and rolling out to edges.

NOTE: In exterior applications, prevent moisture from affecting adhesion by using Anti Slip Edge Sealer.

Jessup® Conformable Safety Track® 3700 technical information

Roll length60 feet*
Roll width2' to 12"
ColoursBlack, Black/Yellow
Thickness
Substrate0.038 inch (0.965mm)
Pressure Sensitive Adhesive0.002 inch (0.051 mm)
Release Liner0.002 inch (0.051 mm)
Service Temperature
High (14 days at 220°F)No visible effects
Low (14 days at -20°F)No visible effects

*6” x 24” pre-cut treads and bulk rolls also available. Please ask for details.

Got a Question?

Gallery

Product Downloads

Technical Data Sheet (pdf, 30.08 KB)

Support

REACH & RoHS compliance
bonding people, fixing problems